Skip to main content Skip to search Skip to main navigation

Dual rear axle for 6×6 Mercedes Sprinter 2021 by Bruder

Product information "Dual rear axle for 6×6 Mercedes Sprinter 2021 by Bruder"

Dual rear axle for 6×6 Mercedes Sprinter 2021 by Bruder

The set includes all components required to equip a Bruder® 6×6 Mercedes Sprinter with two rigid rear axles and single‑wheel drive. The newly developed powered rigid rear axles by 3D‑Parts for the Sprinter allow lateral articulation and independent suspension on both sides. The wheels no longer tilt as they did with previous versions. The plastic components are sintered from polyamide using rapid prototyping. Some cuts to the vehicle frame of the Bruder Sprinter are necessary for installation. Experience in model building is required for this conversion.

With the rims offered here, the distance from outer tire edge to outer tire edge is 134 mm. The width without axle stubs is 112 mm.

The motors with 150 rpm are designed for operation at 12 volts. The motors with 300 rpm are designed for 7.4‑volt LiPos.

All screws, nuts, axles and coil springs are included. You will still need:

  • 4 motors: 6 V 300 rpm or 12 V 150 rpm

Note: Tires and rims are not included in the set. No electronics or cables are supplied.

Video instructions for opening the Sprinter and installing our axles can be found here.