Rims
Product information “2 pieces low‑loader dual rims chrome”Selection of tires and rims
Follow our new color‑coding system: The images of our tires and rims feature colored dots indicating compatibility. Matching colors mean they fit together.
Please take great care when cutting threads and tightening the grub screws, as the scale‑accurate rims can easily become misaligned or lose their hold. Tighten with caution.Low‑loader dual rims in chrome, made of plastic. Set consisting of two dual rims with hubcaps.Contents:2 dual rims4 ball‑bearing dummies 5×11×42 SAF hubcaps2 universal hubcaps
€
15
.50*
Product Information: Dual Rim (for AFV and Veroma)Tire and Rim SelectionFollow our new color‑coding system: the images of our tires and rims feature colored dots indicating compatibility. Matching colors mean the parts fit together.Important NotePlease take great care when cutting the thread and tightening the grub screw, as the scale‑accurate rims can easily become misaligned or lose their hold if overtightened.DescriptionThis dual rim is designed for the low‑loader tires from Veroma (item no. 220613). These tires have an outer diameter of 52 mm and fit the Sprinter very well.With some additional cuts to the frame of the Bruder Mercedes Sprinter, the dual tires fit nicely under the vehicle.This rim is specifically made for our rigid rear axle for the Sprinter. It is secured to the motor shaft with an M3 grub screw.
€
5
.50*
Product Information: Gator Rim for Fischertechnik TiresTire and Rim Selection
Follow our new color‑coding system:
The images of our tires and rims feature colored dots indicating compatibility.
Matching colors mean the parts fit together.Important note:
When cutting the thread and tightening the grub screw, please work very carefully.
Due to the scale‑accurate design, the rim can easily become misaligned or lose its hold if overtightened.
As always: tight is good — overtight is broken.These rims are designed for the 3 mm motor shafts used in our drive units.
The shafts feature a flat section, allowing the rim to be secured with a grub screw inserted into a radial bore.The bore simply needs to be tapped with an M3 thread using a thread cutter.
€
5
.50*
Product information “Low‑loader aluminium rims”Selection of tires and rims
Follow our new color‑coding system: The images of our tires and rims feature colored dots indicating compatibility. Matching colors mean they fit together.Please take great care when cutting threads and tightening the grub screws, as the scale‑accurate rims can easily become misaligned or lose their hold. Tighten with caution.Low‑loader aluminium rims, scale 1/16, dual‑rim design with two bearing seats for 5×11×4 ball bearings. Rim diameter 29 mm, width 29 mm.Contents:2 dual rims made of aluminium2 SAF plastic hubcaps
€
52
.00*
Product information “Low‑loader – dual rims grey”Selection of tires and rims
Follow our new color‑coding system: The images of our tires and rims feature colored dots indicating compatibility. Matching colors mean they fit together.
Please take great care when cutting threads and tightening the grub screws, as the scale‑accurate rims can easily become misaligned or lose their hold. Tighten with caution.Low‑loader dual rims in grey, made of plastic. Set consisting of two dual rims with hubcaps.Contents:2 dual rims4 ball bearings 5×11×42 SAF hubcaps2 universal hubcaps
€
11
.00*
Product Information: Rear Rim (for Fischertechnik Tires)Tire and Rim Selection
Follow our new color‑coding system:
The images of our tires and rims feature colored dots indicating compatibility.
Matching colors = compatible parts.Important note:
When cutting the thread and tightening the grub screw, please work very carefully.
Due to the scale‑accurate design, the rim may easily become misaligned or lose its hold if overtightened.
Remember: tight is good — overtight is broken.This rear Sprinter rim is designed for Fischertechnik tires.
The rim includes additional grooves to ensure a secure fit of the Fischertechnik tire.The rim is made for 3 mm motor shafts used in our drive systems.
These shafts have a flat section, allowing the rim to be secured with a grub screw inserted into a radial bore.The bore only needs to be tapped with an M3 thread using a thread cutter.
€
5
.50*
Product Information: Rear Sprinter Rim (for AFV Tires)Tire and Rim Selection
Follow our new color‑coding system:
The images of our tires and rims feature colored dots indicating compatibility.
Matching colors mean the parts fit together.Important note:
Please take great care when cutting the thread and tightening the grub screw.
Due to the scale‑accurate design, the rim can easily become misaligned or lose its hold if overtightened.
As always: tight is good — overtight is broken.This rim represents dual rear‑axle tires.These rims are designed for the 3 mm motor shafts used in our drive units.
The shafts feature a flat section, allowing the rim to be secured with a grub screw inserted into a radial bore.The bore simply needs to be tapped with an M3 thread using a thread cutter.
€
5
.50*
Product information “Road tire (by Fischertechnik)”Selection of tires and rims
Follow our new color‑coding system: The images of our tires and rims feature colored dots indicating compatibility. Matching colors mean they fit together.Specifications:Outer diameter: 52 mmInner diameter: 29 mmWidth: 20 mmScope of delivery: One (1) tire
€
3
.00*
Product Information: Spoked Rim (for AFV Tires)Tire and Rim Selection
Follow our new color‑coding system:
The images of our tires and rims feature colored dots indicating compatibility.
Matching colors mean the parts fit together.Important note:
When cutting the thread and tightening the grub screw, please work very carefully.
Due to the scale‑accurate design, the rim can easily become misaligned or lose its hold if overtightened.
As always: tight is good — overtight is broken.These rims are designed for the 3 mm motor shafts used in our drive units.
The shafts feature a flat section, allowing the rim to be secured with a grub screw inserted into a radial bore.The bore simply needs to be tapped with an M3 thread using a thread cutter.
€
5
.50*
Product Information: Spoked Rim for Fischertechnik TiresTire and Rim Selection
Follow our new color‑coding system:
The images of our tires and rims feature colored dots indicating compatibility.
Matching colors mean the parts fit together.Important note:
Please take great care when cutting the thread and tightening the grub screw.
Due to the scale‑accurate design, the rim can easily become misaligned or lose its hold if overtightened.These rims are designed for the 3 mm motor shafts used in our drive units.
The shafts feature a flat section, allowing the rim to be secured with a grub screw inserted into a radial bore.The bore simply needs to be tapped with an M3 thread using a thread cutter.
€
5
.50*
Product Information: Spoked Rim for Hummer Tires (AFV or Playmobil)Tire and Rim Selection
Follow our new color‑coding system:
The images of our tires and rims feature colored dots indicating compatibility.
Matching colors mean the parts fit together.Important note:
Please take great care when cutting the thread and tightening the grub screw.
Due to the scale‑accurate design, the rim can easily become misaligned or lose its hold if overtightened.
As always: tight is good — overtight is broken.These rims are designed for the 3 mm motor shafts used in our drive units.
The shafts feature a flat section, allowing the rim to be secured with a grub screw inserted into a radial bore.The bore simply needs to be tapped with an M3 thread using a thread cutter.
€
5
.50*
Product Information: Front Sprinter Rim (for AFV Tires)Tire and Rim Selection
Follow our new color‑coding system:
The images of our tires and rims feature colored dots indicating compatibility.
Matching colors mean the parts fit together.Important note:
Please take great care when cutting the thread and tightening the grub screw.
Due to the scale‑accurate design, the rim can easily become misaligned or lose its hold if overtightened.These rims are designed for the 3 mm motor shafts used in our drive units.
The shafts feature a flat section, allowing the rim to be secured with a grub screw inserted into a radial bore.The bore simply needs to be tapped with an M3 thread using a thread cutter.Legal notice:
The Mercedes star shown in the product images is present only on my personal prototypes.
To respect the rights of Mercedes‑Benz, all rims are delivered without the star.
€
5
.50*
Produktinformationen "Sprinterfelge vorne (für Fischertechnikreifen)"Auswahl von Reifen und FelgenFolgen Sie unserem neuen Farbleitsystem: Die Abbildungen unserer Reifen und Felgen haben farbige Punkte zur Darstellung der Kompatibilität. Bei gleicher Farbe passen beide zusammen.
Achtung beim
Schneiden der Gewinde und Festziehen der Madenschrauben ist große
Vorsicht geboten, da die originalgetreuen Felgen sonst schnell eiern
oder gar nicht mehr halten! Nach fest kommt ab ;)
Die Felgen haben zusätzliche Nuten, um den Fischertechnik-Reifen Halt zu geben.
Sie sind für 3mm Wellen der Motoren gemacht, die wir bei unseren Antrieben verwenden.
Diese haben eine Abflachung und daher werden die Felgen über eine Madenschraube in einer radialen Bohrung fixiert.
Die Bohrung muss nur noch mit einem Gewindebohrer ein M3 Gewinde geschnitten bekommen.
Achtung: Der
abgebildete Mercedes-Stern ist nur auf meinen persönlichen Exemplaren
drauf. Um die Rechte der Firma Mercedes-Benz nicht zu verletzen, werden
die Felgen ohne Stern ausgeliefert.
€
5
.50*
Product Information: Steel Rim (by AFV)Tire and Rim SelectionFollow our new color‑coding system: the images of our tires and rims feature colored dots indicating compatibility. Matching colors mean the parts fit together.Important NotePlease take great care when cutting the thread and tightening the grub screw, as the scale‑accurate rims can easily become misaligned or lose their hold if overtightened.DescriptionThese rims are designed for the 3 mm motor shafts used in our drive units. The shafts have a flat section, allowing the rim to be secured with a grub screw inserted into a radial bore.The bore simply needs to be tapped with an M3 thread using a thread cutter.
€
5
.50*
Product Information: Sprinter Rim (for Fischertechnik Tires)Tire and Rim SelectionFollow our new color‑coding system: the images of our tires and rims feature colored dots indicating compatibility. Matching colors mean the parts fit together.Important NotePlease take great care when cutting the thread and tightening the grub screw, as the scale‑accurate rims can easily become misaligned or lose their hold if overtightened.DescriptionThis Sprinter rim can be used on the front or rear with Fischertechnik tires.The rims are designed for the 3 mm motor shafts used in our drive units. These shafts have a flat section, allowing the rim to be secured with a grub screw inserted into a radial bore.The bore simply needs to be tapped with an M3 thread using a thread cutter.
€
5
.50*
Product information “Sprinter rim (for Fischertechnik tires)”Selection of tires and rims
Follow our new color‑coding system: The images of our tires and rims feature colored dots indicating compatibility. Matching colors mean they fit together.Please take great care when cutting threads and tightening the grub screws, as the scale‑accurate rims can easily become misaligned or lose their hold. Tighten with caution.Sprinter rim, front/rear, for Fischertechnik tires.These rims are designed for the 3 mm motor shafts used in our drive units.The shafts have a flat section, allowing the rims to be secured with a grub screw inserted into a radial bore.The bore only needs to be threaded with an M3 tap.
€
5
.50*