Sprinter according to customer specifications

You can either send us your vehicle or chassis by mail for processing, or you can oder it directly from us.You can choose from the following options:Disassembly only (You send in your vehicle or purchase one from us)Chassis cut‑outs only (You send in your chassis)Chassis cut‑outs and installation of the drive units (You send in your chassis)Vehicle disassembly and chassis cut‑outs (You send in your vehicle or purchase one from us)Vehicle disassembly, chassis cut‑outs, and installation of the drive unit (You send in your vehicle or purchase one from us)Feel free to contact us anytime.

Dual rear axle for 6×6 Mercedes Sprinter 2021 by BruderThe set includes all components required to equip a Bruder® 6×6 Mercedes Sprinter with two rigid rear axles and single‑wheel drive. The newly developed powered rigid rear axles by 3D‑Parts for the Sprinter allow lateral articulation and independent suspension on both sides. The wheels no longer tilt as they did with previous versions. The plastic components are sintered from polyamide using rapid prototyping. Some cuts to the vehicle frame of the Bruder Sprinter are necessary for installation. Experience in model building is required for this conversion.With the rims offered here, the distance from outer tire edge to outer tire edge is 134 mm. The width without axle stubs is 112 mm.The motors with 150 rpm are designed for operation at 12 volts. The motors with 300 rpm are designed for 7.4‑volt LiPos.All screws, nuts, axles and coil springs are included. You will still need:4 motors: 6 V 300 rpm or 12 V 150 rpmNote: Tires and rims are not included in the set. No electronics or cables are supplied.Video instructions for opening the Sprinter and installing our axles can be found here.

Product information “Front axle for Jeep Wrangler Rubicon by Bruder WITHOUT motors and servo”The set includes all components required to build a front axle with single‑wheel drive. Tires, rims, motors, and servo are not included.Please refer to these installation pictures: CLICK MEWe recommend the large (60 mm) off‑road tires from Fischertechnik; they have the correct diameter, and we offer matching rims.Included are all screws, ball joints, threaded rods, nuts, axles, and coil springs.You will also need:Motors: 6 V 300 rpm or 12 V 150 rpmServoNote: The set does not include tires or rims. No electronics or cables are supplied.

The set includes all components required to convert a Bruder® John Deere Gator XUV 855D to front‑axle drive with individual wheel drive. No rims are included. No tires are included.Installation example If you order without motors and servo:The Gator requires the following servo:Dimensions: 19.5 mm × 8.3 mm × 19 mmWeight: 3.7 gExamples: Amax G03AP, Kavan GO‑03 20.0037, or Micro‑Servo S37JRPlease use motors such as: Gator drive motors (200 rpm, 6 V)Please refer to the disassembly instructions for the Gator.The plastic components are sintered from polyamide using rapid prototyping. Some cuts to the Bruder vehicle frame are required for installation. Model‑building experience is necessary for this conversion.With the rims offered here, the distance from outer tire edge to outer tire edge is 106 mm. The width without axle pins is 86 mm.The motors with 200 revolutions per minute are designed for operation at 6 volts (continuous operation under rated load). A 7.4 V LiPo battery can be fitted under the Gator’s bed with a few cuts.Delivered components include all screws, ball joints, threaded rods, nuts, axle, and coil springs. Important: The set does not include tires or rims. No electronics or cables are included.

The set includes all components required to assemble a front axle with individual wheel drive. No rims are included. The axle differs from the other sets in this shop in the axle width and in the specific adaptation for installation in the Land Rover Defender by Bruder®.Please take a look at these installation images: CLICK MEWe recommend the small (50 mm) off‑road tires or the road tires from Fischertechnik; they have the correct diameter, and we offer matching rims.The set is supplied without geared motors. Please note: the motors for the Defender are shorter than those for the Sprinter or the RAM.For the 6 V motors, we recommend a 7.4 V LiPo battery.The width of the axle without shaft pins is ??? mm. The width between the outer edges of the tires is ??? mm.Included are all screws, ball joints, threaded rods, nuts, axles, and coil springs.Note: The set does not include tires or rims. No electronics or cables are supplied.

The set includes all components needed to convert the new 2021 Mercedes Sprinter models by Bruder® to front-wheel drive with individual wheel drive. The plastic components are made of polyamide using rapid prototyping sintering. Some cuts to the vehicle frame of the Bruder Sprinter are necessary for installation. Experience in model building is required for this conversion. With the rims offered here, the distance from the outer edge of one tire to the outer edge of the other tire is 134mm. The width without axle stubs is 112mm. The set includes all screws, ball joints, threaded rods, nuts, axles, and coil springs. You will also need: 2 motors: 6V 300rpm or 12V 150rpm Servo Note: Tires and rims are not included in the set. Additionally, no electronics or cables are provided."

Note: This drive system is for the pre‑2021 Bruder Sprinter, which is generally no longer available.The set includes all components required to convert a Mercedes Sprinter by Bruder® to front‑wheel drive using individual wheel drive.Installation example No rims are included. Please refer to the videos below the images of the axle as installation instructions.The plastic components are sintered from polyamide using rapid prototyping. For installation, several cuts to the vehicle frame of the Bruder Sprinter are necessary. Experience in model building is required for the conversion. With the rims offered here, the distance from outer tire edge to outer tire edge is 134 mm. The width without shaft pins is 112 mm.The motors with 150 revolutions per minute are designed for operation at 12 volts. A 12 V battery pack can be fitted under the Sprinter’s flatbed with a few cuts.The motors with 300 revolutions per minute are designed for 7.4‑volt LiPos.You can use these motors:Motors: 6 V 300 rpm or 12 V 150 rpmServoIncluded are all screws, ball joints, threaded rods, nuts, axle, 2 motors, coil springs, and steering servo.Note: The set does not include tires or rims. No electronics or cables are supplied.

Product information “Front axle for RAM 2500 Power Wagon by Bruder®”This set includes all components required to build a front axle with independent wheel drive. No rims are included. The axle differs from other sets in our shop in both axle width and its specific adaptation for installation in the Bruder® RAM 2500.Please refer to the installation images here: CLICK MEWe recommend the large 60 mm Fischertechnik off‑road tires, as they have the correct diameter and we offer matching rims.Axle dimensions:Width without shaft pins: 118 mmWidth across the outer edges of the tires: 145 mmDistance from vehicle axle to underside of the vehicle floor: 8 mmIncluded in delivery: All screws, rod ends, threaded rods, nuts, axles, and coil springs.You will additionally need:2 motors: 6 V 300 rpm or 12 V 150 rpmServoNote:

Newly developed sets for illuminating the original headlight lenses of the Bruder Sprinter model. Please purchase the required 1206 SMD LEDs with pre‑soldered enamel wires, for example from: www.leds-and-more.de You can also obtain the resistors there.The set includes:1 pair of black inserts, left and rightCircuit diagram with resistor values for 5 V (BEC) operating voltageIf you order with LEDs and resistors, we additionally supply:2 white (or warm‑white) SMD LEDs, size 1206, with pre‑soldered enamel wires2 orange SMD LEDs, size 1206, with pre‑soldered enamel wires2 × 150‑ohm resistors, e.g. these1 × 47‑ohm resistor, e.g. this oneIMPORTANT: This set fits only the new (2021) Sprinter model by Bruder.

Installation kit for rear light with indicatorNewly developed sets for illuminating the original rear light lenses of the Bruder Sprinter model. Please purchase the required 1206 SMD LEDs with pre‑soldered enamel wires, for example from: www.leds-and-more.de You can also obtain the resistors there.Please note: Since the lens is red, the indicator will appear more red even though an orange LED is used.The set includes:1 pair of black inserts, left and rightCircuit diagram with resistor values for 5 V (BEC) operating voltageIf you order with LEDs and resistors, we additionally supply:4 red SMD LEDs, size 1206, with pre‑soldered enamel wires2 orange SMD LEDs, size 1206, with pre‑soldered enamel wires2 × 150‑ohm resistors, e.g. these1 × 33‑ohm resistor, e.g. this oneIMPORTANT: This set fits only the new (2021) Sprinter model by Bruder.

John Deere Gator XUV 855D original and NEW from Bruder, opened and prepared with cutouts and openings for installing our drive axlesWe have disassembled the vehicle and carried out all required cuts and drillings so that you can install our drive axles. The drive axle sets are not included.To complete the vehicle, you will additionally need:Front axle and rear axleRims and road tires or off‑road tiresSpeed controllerBattery and cablesPlease note the following conditions:Bruder vehicles are not designed to be opened. Even with our experience and machining equipment, small damages cannot be avoided. You must accept minor imperfections; otherwise, we cannot offer this service. We will send you an opened vehicle with all necessary cutouts, and you will install our drive units yourself and complete the RC vehicle. The pictures show the vehicle with installed axles.

John Deere Gator XUV 855D, original and NEW from Bruder, with installed drive axles. We have disassembled the vehicle and completed all necessary cuts and drillings to install our drive axles.To complete the vehicle, you will additionally need:Rims and road tires or off‑road tiresElectronic speed controllerBattery and cablesIf you order without motors and servo:The Gator requires the following servo:Dimensions: 19.5 mm × 8.3 mm × 19 mmWeight: 3.7 gExamples: Amax G03AP, Kavan GO‑03 20.0037, or Micro‑Servo S37JRPlease use motors such as: Gator drive motors (200 rpm, 6 V)Please note a delivery time of up to 6 weeks for the modified vehicle.

MB Sprinter 2021 ambulance with installed drive systemWe have disassembled the vehicle, carried out all necessary cuts and drillings, and installed our drive axles. To complete the vehicle, you will still need:Rims and tiresSpeed controllerBattery and cablesReceiverAnd if you order without motors and servo:2 motors: 6 V 300 rpm or 12 V 150 rpmServoPlease note a delivery time of up to 6 weeks for the modified vehicle.

We have disassembled the vehicle and made all the necessary cuts and drillings to install our drive axles. To complete the vehicle, you will need: Rims and road tires or off-road tires Speed controller Battery and cables Motors: 6V 300rpm or 12V 150rpm Servo Please note the delivery time of up to 6 weeks for the modified vehicle.

We have disassembled the vehicle and made all the necessary cuts and drillings to install our drive axles. To complete the vehicle, you will need: Rims and road tires or off-road tires Speed controller Battery and cables Motors: 6V 300rpm or 12V 150rpm Servo Please note the delivery time of up to 6 weeks for the modified vehicle.

MB Sprinter 2021 DHL with Installed Drive UnitWe have disassembled the vehicle, carried out all necessary cuts and drillings, and installed our drive axles. To complete the vehicle, you will still need:Rims and tiresSpeed controllerBattery and cablesReceiverAnd if you order without motors and servo:2 motors: 6 V 300 rpm or 12 V 150 rpmServoPlease note the delivery time of up to 6 weeks for the modified vehicle.

MB Sprinter 2021 Municipal version – opened and pre‑preparedWe have disassembled the vehicle and completed all necessary cuts and drillings so that you can install our drive axles. To complete the vehicle, you will additionally need:Rims and tiresElectronic speed controllerBattery and cablesReceiverAnd if you order without motors and servo:2 motors: 6 V 300 rpm or 12 V 150 rpmServoPlease note a delivery time of up to 6 weeks for the modified vehicle.

MB Sprinter 2021 Municipal Version with Installed Drive UnitWe have disassembled the vehicle, carried out all necessary cuts and drillings, and installed our drive axles. To complete the vehicle, you will still need:Rims and tiresSpeed controllerBattery and cablesReceiverAnd if you order without motors and servo:2 motors: 6 V 300 rpm or 12 V 150 rpmServoPlease note the delivery time of up to 6 weeks for the modified vehicle.

MB Sprinter 2021 Transfer with installed drive systemWe have disassembled the vehicle, completed all necessary cuts and drillings, and installed our drive axles. To complete the vehicle, you will additionally need:Rims and tiresElectronic speed controllerBattery and cablesReceiverIf you order without motors and servo:2 motors: 6 V 300 rpm or 12 V 150 rpmServoPlease note a delivery time of up to 6 weeks for the modified vehicle.

Product Information "Preparation for Painting: Complete Disassembly of the Body" We disassemble the body into all individual parts to prepare the components for painting.The vehicle is packaged and shipped in its disassembled state.

RAM 2500 Power Wagon GREY with Roadster Trailer, original and NEW from Bruder, with installed drive axles. We have disassembled the vehicle and performed all cuts and drillings required to install our drive axles.To complete the vehicle, you will still need:Rims and road tires or off‑road tiresSpeed controllerBattery and cablesOnly if you order without motors and servo:Motors: 6 V 300 rpm or 12 V 150 rpmServoPlease note the delivery time of up to 6 weeks for the modified vehicle.

Product information “RAM 2500 Power Wagon – original and NEW by Bruder, opened and pre‑cut for installation of our drive axles”On request, we can also prepare other Bruder RAM models for conversion. Feel free to contact us.We have disassembled the vehicle and carried out all required cuts and drillings so that you can install our drive axles. The drive axle sets are not included.To complete the vehicle, you will additionally need:Front and rear axleMotors: 6 V 300 rpm or 12 V 150 rpmServoRims and road tires or off‑road tiresSpeed controllerBattery and cablesPlease note the following conditions:Bruder vehicles are not designed to be opened. Even with our experience and machining equipment, small damages cannot be avoided. You must accept minor imperfections; otherwise, we cannot offer this service. We supply you with an opened vehicle featuring all required cutouts, and you install our drive units yourself to complete the RC vehicle. The images show the vehicle with axles installed.

Product information “RAM 2500 Power Wagon RED – original and NEW by Bruder, with installed drive axles”We have disassembled the vehicle, performed all required cuts and drillings, and installed our drive axles.To complete the vehicle, you will additionally need:Rims and road tires or off‑road tiresSpeed controllerBattery and cablesOnly if you order without motors and servo, you will also need:Motors: 6 V 300 rpm or 12 V 150 rpmServoPlease note the delivery time of up to 6 weeks for the modified vehicle.