John Deer Gator XUV 855D
You can either send us your vehicle or chassis by mail for processing, or you can oder it directly from us.You can choose from the following options:Disassembly only
(You send in your vehicle or purchase one from us)Chassis cut‑outs only
(You send in your chassis)Chassis cut‑outs and installation of the drive units
(You send in your chassis)Vehicle disassembly and chassis cut‑outs
(You send in your vehicle or purchase one from us)Vehicle disassembly, chassis cut‑outs, and installation of the drive unit
(You send in your vehicle or purchase one from us)Feel free to contact us anytime.
€
19
.00*
The set includes all components required to convert a Bruder® John Deere Gator XUV 855D to front‑axle drive with individual wheel drive.
No rims are included.
No tires are included.Installation example
If you order without motors and servo:The Gator requires the following servo:Dimensions: 19.5 mm × 8.3 mm × 19 mmWeight: 3.7 gExamples: Amax G03AP, Kavan GO‑03 20.0037, or Micro‑Servo S37JRPlease use motors such as: Gator drive motors (200 rpm, 6 V)Please refer to the disassembly instructions for the Gator.The plastic components are sintered from polyamide using rapid prototyping.
Some cuts to the Bruder vehicle frame are required for installation.
Model‑building experience is necessary for this conversion.With the rims offered here, the distance from outer tire edge to outer tire edge is 106 mm.
The width without axle pins is 86 mm.The motors with 200 revolutions per minute are designed for operation at 6 volts (continuous operation under rated load).
A 7.4 V LiPo battery can be fitted under the Gator’s bed with a few cuts.Delivered components include all screws, ball joints, threaded rods, nuts, axle, and coil springs.
Important: The set does not include tires or rims.
No electronics or cables are included.
€
69
.00*
John Deere Gator XUV 855D original and NEW from Bruder, opened and prepared with cutouts and openings for installing our drive axlesWe have disassembled the vehicle and carried out all required cuts and drillings so that you can install our drive axles. The drive axle sets are not included.To complete the vehicle, you will additionally need:Front axle and rear axleRims and road tires or off‑road tiresSpeed controllerBattery and cablesPlease note the following conditions:Bruder vehicles are not designed to be opened. Even with our experience and machining equipment, small damages cannot be avoided. You must accept minor imperfections; otherwise, we cannot offer this service. We will send you an opened vehicle with all necessary cutouts, and you will install our drive units yourself and complete the RC vehicle. The pictures show the vehicle with installed axles.
€
70
.00*
John Deere Gator XUV 855D, original and NEW from Bruder, with installed drive axles.
We have disassembled the vehicle and completed all necessary cuts and drillings to install our drive axles.To complete the vehicle, you will additionally need:Rims and road tires or off‑road tiresElectronic speed controllerBattery and cablesIf you order without motors and servo:The Gator requires the following servo:Dimensions: 19.5 mm × 8.3 mm × 19 mmWeight: 3.7 gExamples: Amax G03AP, Kavan GO‑03 20.0037, or Micro‑Servo S37JRPlease use motors such as: Gator drive motors (200 rpm, 6 V)Please note a delivery time of up to 6 weeks for the modified vehicle.
€
180
.00*
The set includes all components required to convert a Bruder® John Deere Gator XUV 855D to rear‑axle drive with individual wheel drive.
No rims are included.
No tires are included.Installation example
If you order without motors:Please use motors such as: Gator drive motors (200 rpm, 6 V)Please refer to the disassembly instructions for the Gator.The plastic components are sintered from polyamide using rapid prototyping.
Some cuts to the Bruder vehicle frame are required for installation.
Model‑building experience is necessary for this conversion.With the rims offered here, the distance from outer tire edge to outer tire edge is 106 mm.
The width without axle pins is 86 mm.The motors with 200 revolutions per minute are designed for operation at 6 volts (continuous operation under rated load).
A 7.4 V LiPo battery can be fitted under the Gator’s bed with a few cuts.Delivered components include all screws, ball joints, threaded rods, nuts, axle, and coil springs.
Important: The set does not include tires or rims.
No electronics or cables are included.
€
32
.00*