RAM 2500 Power Wagon
RAM 2500 Power Wagon GREY with Roadster Trailer, original and NEW from Bruder, with installed drive axles.
We have disassembled the vehicle and performed all cuts and drillings required to install our drive axles.To complete the vehicle, you will still need:Rims and road tires or off‑road tiresSpeed controllerBattery and cablesOnly if you order without motors and servo:Motors: 6 V 300 rpm or 12 V 150 rpmServoPlease note the delivery time of up to 6 weeks for the modified vehicle.
€
260
.00*
Product information “RAM 2500 Power Wagon RED – original and NEW by Bruder, with installed drive axles”We have disassembled the vehicle, performed all required cuts and drillings, and installed our drive axles.To complete the vehicle, you will additionally need:Rims and road tires or off‑road tiresSpeed controllerBattery and cablesOnly if you order without motors and servo, you will also need:Motors: 6 V 300 rpm or 12 V 150 rpmServoPlease note the delivery time of up to 6 weeks for the modified vehicle.
€
225
.00*
Product information “Front axle for RAM 2500 Power Wagon by Bruder®”This set includes all components required to build a front axle with independent wheel drive. No rims are included.
The axle differs from other sets in our shop in both axle width and its specific adaptation for installation in the Bruder® RAM 2500.Please refer to the installation images here: CLICK MEWe recommend the large 60 mm Fischertechnik off‑road tires, as they have the correct diameter and we offer matching rims.Axle dimensions:Width without shaft pins: 118 mmWidth across the outer edges of the tires: 145 mmDistance from vehicle axle to underside of the vehicle floor: 8 mmIncluded in delivery:
All screws, rod ends, threaded rods, nuts, axles, and coil springs.You will additionally need:2 motors: 6 V 300 rpm or 12 V 150 rpmServoNote:
€
89
.00*
Product information “RAM 2500 Power Wagon – original and NEW by Bruder, opened and pre‑cut for installation of our drive axles”On request, we can also prepare other Bruder RAM models for conversion. Feel free to contact us.We have disassembled the vehicle and carried out all required cuts and drillings so that you can install our drive axles. The drive axle sets are not included.To complete the vehicle, you will additionally need:Front and rear axleMotors: 6 V 300 rpm or 12 V 150 rpmServoRims and road tires or off‑road tiresSpeed controllerBattery and cablesPlease note the following conditions:Bruder vehicles are not designed to be opened. Even with our experience and machining equipment, small damages cannot be avoided. You must accept minor imperfections; otherwise, we cannot offer this service.
We supply you with an opened vehicle featuring all required cutouts, and you install our drive units yourself to complete the RC vehicle. The images show the vehicle with axles installed.
€
87
.00*
Product information “Rear axle for RAM 2500 Power Wagon by Bruder®”This set includes all components required to build a rigid rear axle with independent wheel drive for the RAM. The axle differs from the Sprinter drive units offered in our shop in both axle width and its specific adaptation for installation in the Bruder® RAM 2500.Axle dimensions:Width without shaft pins: 118 mmWidth across the outer edges of the tires: 145 mmFully extended suspension: distance from vehicle axle to underside of the vehicle floor: 18 mmPlease refer to the installation images here: CLICK MEWe recommend the large 60 mm Fischertechnik off‑road tires, as they have the correct diameter and we offer matching rims.Included in delivery:
All screws, nuts, and coil springs.You will additionally need:2 motors: 6 V 300 rpm or 12 V 150 rpmNote: Tires and rims are not included in the set.
No electronics, motors, or cables are supplied.
€
44
.00*
You can either send us your vehicle or chassis by mail for processing, or you can oder it directly from us.You can choose from the following options:Disassembly only
(You send in your vehicle or purchase one from us)Chassis cut‑outs only
(You send in your chassis)Chassis cut‑outs and installation of the drive units
(You send in your chassis)Vehicle disassembly and chassis cut‑outs
(You send in your vehicle or purchase one from us)Vehicle disassembly, chassis cut‑outs, and installation of the drive unit
(You send in your vehicle or purchase one from us)Feel free to contact us anytime.
€
19
.00*