6‑Chamber Tail Light with 7.2‑Volt Lighting PCBFully assembled, suitable for scale 1/16 to 1/14.5, equipped with plastic inserts for improved illumination of each chamber, fitted with SMD LEDs, common positive pole, 5 lighting functions: indicator, brake light, driving light + position light, reverse light, and fog light.
Cable length approx. 60 cm.
Dimensions (L×W×H): 38 × 11 × 6.5 mm.1 left tail light1 right tail light4 mounting screws M2×6ManualWarning! Not suitable for children under 14 years of age.
Coil Spring for Suspension (price per piece)
We use these three spring types for the suspension of our vehicle axles.
All versions share the same dimensions and are therefore interchangeable.Front axles are typically equipped with the soft springs.
Rear axles are supplied with hard springs, or with a combination of medium and hard springs.
The rear axle of the Gator is delivered with the medium spring hardness.Available spring rates:softmediumhard
Vehicle air filter in 1:14.5 scale, made of polyamide (black)
Dimensions:Drum length: 37 mmDiameter: 29 mmLid diameter: 35 mmTube on the drum:Diameter: 11 mmLength: 15 mm
Construction Machinery Oil Filter in 1:14.5 scale
Made from polyamide (solid black coloration).
Please note: One single filter is supplied.Dimensions:Drum length: 37 mmDrum diameter: 29 mmLid diameter: 35 mmPipe on drum: diameter 11 mm, length 15 mm
Eurobox Storage Crate in 1:14.5 scale
Ideal scale accessory for vehicle models or dioramas.
The crates are fully stackable.Dimensions: 51 mm × 34 mm × 26 mm (W × D × H)
Mini Storage Crate
Stackable box in 1:14.5 scale.
Currently available only in black.
Ideal scale accessory for vehicle models or dioramas. The crates are fully stackable.Dimensions: 21 mm × 13 mm × 11 mm (W × D × H)
Newly developed sets for illuminating the original headlight lenses of the Bruder Sprinter model.
Please purchase the required 1206 SMD LEDs with pre‑soldered enamel wires, for example from: www.leds-and-more.de
You can also obtain the resistors there.The set includes:1 pair of black inserts, left and rightCircuit diagram with resistor values for 5 V (BEC) operating voltageIf you order with LEDs and resistors, we additionally supply:2 white (or warm‑white) SMD LEDs, size 1206, with pre‑soldered enamel wires2 orange SMD LEDs, size 1206, with pre‑soldered enamel wires2 × 150‑ohm resistors, e.g. these1 × 47‑ohm resistor, e.g. this oneIMPORTANT: This set fits only the new (2021) Sprinter model by Bruder.
Installation kit for rear light with indicatorNewly developed sets for illuminating the original rear light lenses of the Bruder Sprinter model.
Please purchase the required 1206 SMD LEDs with pre‑soldered enamel wires, for example from: www.leds-and-more.de
You can also obtain the resistors there.Please note: Since the lens is red, the indicator will appear more red even though an orange LED is used.The set includes:1 pair of black inserts, left and rightCircuit diagram with resistor values for 5 V (BEC) operating voltageIf you order with LEDs and resistors, we additionally supply:4 red SMD LEDs, size 1206, with pre‑soldered enamel wires2 orange SMD LEDs, size 1206, with pre‑soldered enamel wires2 × 150‑ohm resistors, e.g. these1 × 33‑ohm resistor, e.g. this oneIMPORTANT: This set fits only the new (2021) Sprinter model by Bruder.
License plate holder
Scope of delivery: License plate holder with two small discsBlack license plate holder made of polyamide
Dimensions: 42×9 mm, 1.5 mm thickGrey license plate holder made of ABS‑type resin
Dimensions: 42×9.5 mm, 2.6 mm thick
Machine Control Unit
The control panel is supplied in black and measures 25 × 18 × 10 mm.
It is made from resin and produced using an SLA 3D printer.
The surface can be painted without any issues.
Playmobil Fire Extinguisher
This fire extinguisher fits into our fire‑extinguisher cabinet without the hose once the side handle is removed.
Delivered without hose.Since these items are no longer available as new parts, we purchase used units in good condition to offer them here.Dimensions: 39 mm × 18 mm (H × W)Due to the coloring process, the exact shade cannot be guaranteed.
Painting may be required if a specific color tone is desired.
Vehicle Seat / Machine SeatThis seat is designed for use in a vehicle, crane, roller, or similar model in 1:14.5 scale. It comes with a base that allows 90‑degree indexed rotation.
Made from polyamide, the seat can be easily painted.
Product information “Wheel Chock for Low Loader in 1:14.5 Scale”The wheel chock (also known as a brake chock) in 1:14.5 scale is designed for low‑loader tires with a diameter of 55–60 mm.
It comes pre‑colored in yellow. The shade may vary.An ideal scale accessory for vehicle models or dioramas.
€2.60*
This website uses cookies to ensure the best experience possible. More information...
