6‑Chamber Tail Light with 7.2‑Volt Lighting PCBFully assembled, suitable for scale 1/16 to 1/14.5, equipped with plastic inserts for improved illumination of each chamber, fitted with SMD LEDs, common positive pole, 5 lighting functions: indicator, brake light, driving light + position light, reverse light, and fog light.
Cable length approx. 60 cm.
Dimensions (L×W×H): 38 × 11 × 6.5 mm.1 left tail light1 right tail light4 mounting screws M2×6ManualWarning! Not suitable for children under 14 years of age.
Vehicle air filter in 1:14.5 scale, made of polyamide (black)
Dimensions:Drum length: 37 mmDiameter: 29 mmLid diameter: 35 mmTube on the drum:Diameter: 11 mmLength: 15 mm
Construction Machinery Oil Filter in 1:14.5 scale
Made from polyamide (solid black coloration).
Please note: One single filter is supplied.Dimensions:Drum length: 37 mmDrum diameter: 29 mmLid diameter: 35 mmPipe on drum: diameter 11 mm, length 15 mm
Newly developed sets for illuminating the original headlight lenses of the Bruder Sprinter model.
Please purchase the required 1206 SMD LEDs with pre‑soldered enamel wires, for example from: www.leds-and-more.de
You can also obtain the resistors there.The set includes:1 pair of black inserts, left and rightCircuit diagram with resistor values for 5 V (BEC) operating voltageIf you order with LEDs and resistors, we additionally supply:2 white (or warm‑white) SMD LEDs, size 1206, with pre‑soldered enamel wires2 orange SMD LEDs, size 1206, with pre‑soldered enamel wires2 × 150‑ohm resistors, e.g. these1 × 47‑ohm resistor, e.g. this oneIMPORTANT: This set fits only the new (2021) Sprinter model by Bruder.
Installation kit for rear light with indicatorNewly developed sets for illuminating the original rear light lenses of the Bruder Sprinter model.
Please purchase the required 1206 SMD LEDs with pre‑soldered enamel wires, for example from: www.leds-and-more.de
You can also obtain the resistors there.Please note: Since the lens is red, the indicator will appear more red even though an orange LED is used.The set includes:1 pair of black inserts, left and rightCircuit diagram with resistor values for 5 V (BEC) operating voltageIf you order with LEDs and resistors, we additionally supply:4 red SMD LEDs, size 1206, with pre‑soldered enamel wires2 orange SMD LEDs, size 1206, with pre‑soldered enamel wires2 × 150‑ohm resistors, e.g. these1 × 33‑ohm resistor, e.g. this oneIMPORTANT: This set fits only the new (2021) Sprinter model by Bruder.
License plate holder
Scope of delivery: License plate holder with two small discsBlack license plate holder made of polyamide
Dimensions: 42×9 mm, 1.5 mm thickGrey license plate holder made of ABS‑type resin
Dimensions: 42×9.5 mm, 2.6 mm thick
